An electrical junction box is a container for electrical connections, usually intended to conceal them from sight and deter tampering. A small metal or plastic junction box may form part of an electrical conduit or thermoplastic-sheathed cable (TPS) wiring system in a building.
Upon request certification ATEX
Click to enlarge image
| Material | ABS |
| Operating temperature | -10 / +40°C (14 / +104°F) Max. 85% non-condensing |
| Protection class | IP 68 |
| Dimensions (mm) | 70x150x58 mm (l x h x p) |
| Storage temperature | - 20 °C / + 50 °C (-4 °F / 122 °F) |
| Connection | Double bead spring terminal blocks in stainless steel, 5.08 pitch, up to 4 cells connectable |
| Calibration | Through 10 Ω multi-turn trimmer |
| Type | SG-4C-A |
| Length | ND (body lead cell not connected shield) |
| 1 | A- (Power Supply - Black) |
| 2 | A+ (Power Supply + Red) |
| 3 | R+ (Sense + Violet) |
| 4 | R- (Sense - Grey) |
| 5 | S- (Signal - White) |
| 6 | S+ (Signal + Green) |
| 7 | GND (Shielded Ground Wire) |
General precautions to be followed in the installation and assembly of load cells:
